alveo Hub · The respiratory lab station

Every test.
One patient record.

Every alveofit device reports into alveo Hub. One record per patient, one combined report, and it keeps working without internet.

alveo Hub showing the choose-a-test home screen
Designed, engineered & made in India
  • Designed and built in India
  • Works with every alveofit device
  • Design applied for
Powered by alveoSenseAI™One combined report across spirometry, oscillometry and the walk test

Why a Hub

Separate devices.
One record.

Without a Hub, every device leaves its own printout and its own file. alveo Hub collects every test as it happens, builds one record per patient and one combined report, ready for the doctor to sign.

Works with every alveofit device

alveoflow Pro and Neo, alveoAir Ultra, alveoair, alveoOxy and alveoASHA, over Wi-Fi and Bluetooth.

Works offline

No internet? Keep testing. The Hub stores every result and syncs to alveoConnect when you reconnect.

Runs on battery

A built-in 8,000 mAh battery for camps, wards and clinics with patchy power.

Comes with your device

Supplied with a new alveofit device. Already have one? Add a Hub to it.

One station

Built for the clinic desk.

A 10.1-inch screen on a stable stand.

Every device

Every alveofit device reports in.

Over Wi-Fi and Bluetooth. Even offline.

Choose a test

Pick the test. Pick the patient.

Spirometry, oscillometry and 6-minute walk from one home screen.

Sign and send

Reports reach the specialist anywhere.

Synced to alveoConnect for review and sign-off.

Design

Black glass. Quietly confident.

A gloss-black bezel framed in white, with the alveoHUB mark where your eye lands last.

Close-up of the alveoHUB logo on the Hub's black bezel

From patient file to signed report.

Every screen built for a busy clinic.

Hub patient file
Patient file
Hub oscillometry results
Oscillometry
Hub spirometry results
Spirometry
Hub sign-off
Sign-off

Take a closer look.

alveo Hub straight on
Edge-to-edge glassA clear home screen for every test, with the status of each connected device.
alveo Hub from behind, showing the stand and ports
Built-in standSits steady on a desk, with ports at the back.
alveo Hub at a three-quarter angle
Reads from anywhereWide viewing angles for the operator and the patient.
10.1″
Clinic display
6 → 1
alveofit devices into one patient record
FHIR R4
Export to hospital systems2

Tech specs

Display
10.1-inch colour screen
Works with
alveoflow Pro, alveoflow Neo, alveoAir Ultra, alveoair, alveoOxy, alveoASHA
Tests
Spirometry, oscillometry, 6-minute walk
Device link
Wi-Fi and Bluetooth Low Energy
Offline
Works without internet; syncs to alveoConnect when connected
Cloud
alveoConnect sync for remote review and sign-off
Interoperability
FHIR R4 and HL7 v2 export2
Battery
Built-in 8,000 mAh
Weight
600 g
Size
About 262 × 180 × 102 mm (with stand)
Compliance
IEC electrical safety and EMC, RoHS, FCC
Availability
Supplied with a new alveofit device, or as an add-on for existing alveofit devices
  1. Acquisition time of 15–30 seconds of tidal breathing per recording, from the alveoflow FOT System specification. Applies to alveoflow Pro and alveoflow Neo.
  2. FHIR R4 and HL7 v2 export from the alveoflow FOT System specification. ABDM integration supported.
  3. CDSCO Class B under MDR 2017. ISO 13485 and MDSAP as stated on alveo.fit. alveoflow: US 510(k) submission pending; not cleared for sale in the United States. alveoair is US FDA 510(k) cleared (K222525, August 2023).
  4. Screens show example data and do not represent a real patient. Interpretation is the responsibility of the treating clinician.